◆ Combined with the characteristics of the bar elements, the sound field design through the software model uses a 120-degree
wide-type waveguide to make the sound more evenly balanced. The box design uses a circular air-conducting method to make
the low-frequency more powerful and elastic, high-density paper cone. Make the sound explosive and high speed, so that the
hearing will not be tired due to the long time. In particular, the domestic custom-made high-quality speaker unit is the core component,
with smooth frequency response and precise coverage angle. The sound is crystal clear and transparent, and the space and texture
are excel lent. The crossover designed by LMS, SmaartLive and other software uses high-purity OFC oxygen-free copper inductor
wire, which minimizes the influence of the wire itself and greatly improves the power carrying capacity. Using special MKP capacitor,
the loss is very low and the internal resistance is very small. The high-power aluminum shell resistor of the enthusiast grade is adopted,
the heat dissipation speed is fast, the resistance value is accurate, and the parameter variation is smal l, which ensures excel lent
stability of sound reproduction. The frequency divider uses a fever-level scaffolding welding process to provide a powerful guarantee
for high-qual ity playback of the speaker system!
Model DV15 DV12 System 2-WAY FULL RANGE 2-WAY FULL RANGE Frequency response 55Hz-18KHz 55Hz-20KHz Driver LF:15"×1 LF:12"×1 HF:3"×1 MF :12"×1 HF:1.73"×1 Nomina limpedance 8Ohms 8 Ohms System sensitivity 101dB 98dB Rated power 600W 400W Peak power 2400W 1600W Maximum SPL 139dB 129dB Diffusion Angle 120°×50° 80°×80° Crossover mode Internal Crossover Internal Crossover Installation Multil-point suspension Multil-point suspension Net weight 35KG 23KG Size(mm) 430W×450D×920H 330W×450D×920H Package size(mm) 522w×540d×1012h 422w×540d×1012h
DM20new version update step
1) Copy the compressed package to the USB flash drive (note that you don't need to decompress it, it is best to format the USB flash drive first)
2) Insert the USB flash drive into any USB port of the mixer, and click “SETUP” on the mixer panel → “Maintenance” → “Update from USB” in the screen
Follow the prompts to complete the installation steps.